Customized Environmental, Energy, Health and Workplace Safety Seminars, Workshops, and Projects at Your Facility

Manufacturing Solutions (AEDC-MS) can provide energy, health and safety as well as regulatory environmental seminars, workshops, and projects at your facility. These seminars, workshops, and projects will be specific to your organization’s requirements and programs.

Each company has different requirements for safety and environmental training as well as energy reduction needs. AMS can help you design a training program based on the needs of your employees. You choose the programs that you need and AEDC-MS will provide site-specific assistance at your facility.

HAZWOPER Emergency Response Classes include 40-Hour, 24-Hour and 8-Hour refresher courses. Our hands-on courses can train your employees to respond safely to hazardous substance spills. Each course is site-specific to your requirements.

Energy Assessment Services
  • Access to the Industrial Assessment Centers (IAC) for Energy Assessments through the Department of Energy
  • Assist manufacturers with finding the right energy resource depending on their usage
  • Provide no cost or low cost self assessment information
  • Provide Energy Assessment Training through the Energy Efficiency Arkansas Program
  • Provide training in specific energy topics as requested. These classes would be dependent on enrollment
  • Usage of federal or state grants to complete Energy Assessments for qualified manufacturers
General Environmental, Health and Safety Services
  • Environmental and Safety Assessments
  • Noise Surveys
  • Industrial Hygiene Technical Assistance
  • Air Sampling
  • OSHA Training
  • RCRA Hazardous Waste Training
  • Building Clean Database
How can you get started?

To find out more about AEDC-MS Sustainability services, please contact Arkansas Manufacturing Solutions at 501-682-1179 or via email.

Upcoming Events › Energy

Events List Navigation

May 2018
$35.00

Foundations of Industrial Energy Efficiency – Fort Smith

May 16th @ 9:00 am - 3:30 pm
University of Arkansas – Fort Smith
Latture Conference Room College of Business Flanders Bldg. Corner of North 50th & Grand Ave. - 5020 Grand Avenue
Fort Smith, 72913 United States
Energy

This Industrial Energy Efficiency training program is intended to provide facilities personnel, energy managers, engineers, and utility representatives with both basic and intermediate understanding of the latest energy efficiency methods, procedures, and best practices.  No matter your background, you will leave this workshop with an actionable understanding of how to save energy within an industrial facility. Justification for energy efficiency Best business practices of energy management State of industrial energy efficiency today Foundational understanding: Plant energy assessments methods and procedures Utility…

Find out more »
June 2018
$35.00

Fundamentals of Compressed Air – Fort Smith

June 26th @ 8:30 am - 4:30 pm
Fort Smith Regional Chamber of Commerce
612 Garrison Ave.
Forth Smith, AR 72901 United States
Energy Training

This one-day introductory course is designed to teach facility engineers, operators and maintenance staff how to achieve 15-25% cost savings through more effective production and use of compressed air. This Level 1 course can be taken as a stand-alone class; it is also a highly recommended prerequisite to the more intensive two-day Level 2 course, Advanced Management of Compressed Air Systems, which will be held in Little Rock, AR on October 3 & 4, 2018. Calculate the energy cost of…

Find out more »
$35.00

Fundamentals of Compressed Air – Fayetteville

June 27th @ 8:30 am - 4:30 pm
University of Arkansas – AT&T Conference Room
700 West Research Center Boulevard
Fayetteville, AR 72701 United States
Compressed Air

This one-day introductory course is designed to teach facility engineers, operators and maintenance staff how to achieve 15-25% cost savings through more effective production and use of compressed air. This Level 1 course can be taken as a stand-alone class; it is also a highly recommended prerequisite to the more intensive two-day Level 2 course, Advanced Management of Compressed Air Systems, which will be held in Little Rock, AR on October 3 & 4, 2018. Calculate the energy cost of…

Find out more »
July 2018
$35.00

Pump Systems Optimization – Jonesboro

July 17th @ 8:30 am - 4:30 pm
Workforce Training Center
5501 Krueger Drive
Jonesboro, AR 72401 United States
Energy

This course will identify the importance of energy conservation and highlight opportunities to optimize your pumping systems for energy efficiency and other systems improvements. When pumping systems are not optimized for best efficiency, they drain a company’s profitability with higher energy and maintenance costs, shorter mean time between repairs, more CO2 emissions and a less reliable system overall. The typical medium-sized plant spends over $1.4 Million a year on energy to run their pumping systems. Better system design and optimized…

Find out more »
$35.00

Basic Motors 101 – Batesville

July 18th @ 8:30 am - 4:30 pm
University of Arkansas Community College – Batesville
2005 White Drive
Batesville, AR 72501 United States
Energy

This one-day work shop will cover motor selection criteria and troubleshooting while discussing in detail the basic principles of how an induction motor operates, from an electric perspective as well as mechanical. More than 300 million motors are used in industry, large buildings and in infrastructure globally, and 30 million new electric motors are sold each year for industrial purposes alone. Electric motor driven systems (EMDSs) in industry are estimated to be responsible for approximately 29% of overall global, and…

Find out more »
$35.00

Fundamentals of Compressed Air – Jonesboro

July 25th @ 8:30 am - 4:30 pm
Workforce Training Center
5501 Krueger Drive
Jonesboro, AR 72401 United States
energy

This one-day introductory course is designed to teach facility engineers, operators and maintenance staff how to achieve 15-25% cost savings through more effective production and use of compressed air. This Level 1 course can be taken as a stand-alone class; it is also a highly recommended prerequisite to the more intensive two-day Level 2 course, Advanced Management of Compressed Air Systems, which will be held in Little Rock, AR on October 3 & 4, 2018. Calculate the energy cost of…

Find out more »
$35.00

Fundamentals of Compressed Air – Morrilton

July 26th @ 8:30 am - 4:30 pm
Morrilton Area Chamber of Commerce
115 East Broadway Street
Morrilton, AR 72210 United States
Energy

This one-day introductory course is designed to teach facility engineers, operators and maintenance staff how to achieve 15-25% cost savings through more effective production and use of compressed air. This Level 1 course can be taken as a stand-alone class; it is also a highly recommended prerequisite to the more intensive two-day Level 2 course, Advanced Management of Compressed Air Systems, which will be held in Little Rock, AR on October 3 & 4, 2018. Calculate the energy cost of…

Find out more »
August 2018
$35.00

Understanding the Interactions of Pumps, Motors and Drives – Stuttgart

August 28th @ 8:30 am - 4:30 pm
Grand Prairie Center
2709 Hwy 165 South
Stuttgart, 72160 United States
motors and pumps

AC induction motors drive approximately 90% of all pumps. An ever-growing portion of pump systems are now managed by variable speed control such as variable frequency drive, eddy current drive mag drive or fluid drive. As the pump, motor, and driver operate as components of the same system, understanding how they react individually and to the other can have a significant impact on your plant’s bottom line. This one-day workshop on Pumps, Motors, and Drives will discuss how the pump,…

Find out more »
$35.00

How to Size Pumps and Motors to Obtain Energy Savings – Little Rock

August 29th @ 8:30 am - 4:30 pm
Pulaski Technical College – Business and Industry Center
3303 E. Roosevelt Road
Little Rock, AR 72206 United States
motors and pumps

A common issue in pumping systems is efficiency and reliability. Why? Because pump system efficiency is highly influenced by the system they are supplying. To insure optimum reliability and efficiency one must focus on the entire system. The major issue in pump system design is design margin. How does one identify design margin and what are the ramifications of incorrect margin? If a system is optimized, won’t it have less design margin? Consider this, design margin comes from one of…

Find out more »
October 2018
$35.00

Fundamentals of Compressed Air – Little Rock

October 2nd @ 8:30 am - 4:30 pm
Pulaski Technical College – Business and Industry Center
3303 E. Roosevelt Road
Little Rock, AR 72206 United States
compressed air

This one-day introductory course is designed to teach facility engineers, operators and maintenance staff how to achieve 15-25% cost savings through more effective production and use of compressed air. This Level 1 course can be taken as a stand-alone class; it is also a highly recommended prerequisite to the more intensive two-day Level 2 course, Advanced Management of Compressed Air Systems, which will be held in Little Rock, AR on October 3 & 4, 2018. Calculate the energy cost of…

Find out more »
$75.00

Advanced Compressed Air Training, Level 2 – Little Rock

October 3rd - 4th @ 8:30 am - 4:30 pm
Pulaski Technical College – Business and Industry Center
3303 E. Roosevelt Road
Little Rock, AR 72206 United States

Optimizing your compressed air systems can lead to higher productivity, energy savings, increased product quality and greater efficiency. This advanced training teaches you to develop a system profile and address point-of-use issues, including determining actual air quality requirements and investigating and reducing highest point-of-use pressure requirements. Collect and use data and tools to assess the efficiency and cost-effectiveness of a compressed air system; Develop and use a system profile; Implement a system maintenance program; Address air quality, highest pressure requirements…

Find out more »
+ Export Events

Company:  Rockline Industries

  • 69% improvement in production time in 3 months
  • 56% reduction in waste within 3 months
  • 16 senior leaders, 8 shift leaders trained and 6 workstations using Kata

The training provided by AMS has been very impactful. We are able to reach our sales demands on time with the accuracy expected, sustain the improvements desired, and grow our trained staff to optimize our available capacity.

Mark Clarke
Rockline Industries
Director of Manufacturing